Compare Air Source Heat Pumps by NIBE

Compare Air Source Heat Pumps by NIBE

Nibe air source heat pumps

If you’re looking for a new heating system which will lower your energy usage and reduce your carbon emissions, you can’t go wrong with an air source heat pump from NIBE. NIBE air source heat pumps are amongst the most intelligent and powerful on the market but have the added benefit of being easy to install, use and maintain.

If you’d like to speak to an air source heat pump installer in your area who can provide tailored advice and a free installation quote, complete our enquiry form now and we’ll put you in touch with up to 3 accredited companies.


Get FREE Heat Pump Quotes

 

Get FREE Air Source Heat Pump quotes from trusted engineers in your area. Get quotes now

 


Nibe Air Source Heat Pumps

NIBE is a Swedish company with 60 years of expertise in the domestic heating industry with a particular focus on energy efficiency and protecting the environment. Market leaders across a range of heating and cooling products, NIBE specialise in heat pumps which extract natural heat from the air (or ground) and use it to heat water for domestic use and for wet central heating systems.

All NIBE heat pumps are developed to ensure installation is as smooth as possible including anti-vibration water connections. NIBE also off a wide range of accessories and product combinations so you can get the heating solution which is best for your home.

Here is the range of NIBE air-to-water heat pumps available in the UK:

NIBE F2040-8 Monobloc NIBE F2040-12 Monobloc NIBE F2040-16 Monobloc NIBE F2300-14 NIBE F2300-20
Heating Capacity (outdoor temp –3 °C with flow temp 35°C) 8.7 kW 11.7 kW 15.8 kW 13.8 kW 17.7 kW
Suitable for Small to medium properties Small to medium properties Small to medium properties Large and commercial properties Large and commercial properties
Minimum Outdoor Working Temperature –20°C –20°C –20°C –25 °C –25 °C
Max outgoing heating temperature 58 °C 58 °C 58 °C 65 °C 65 °C
Voltage 230 V~ 1-phase 230 V~ 1-phase 230 V~ 1-phase 400 V~ 3-phase 400 V~ 3-phase
Dimensions of Outdoor Unit (HxWxD) 900 x 1025 x 420mm 955 x 1145 x 450mm 1450 x 1145 x 450mm 1385 x 1455 x 620mm 1385 x 1455 x 620mm
Warranty* 12 or 24 months 12 or 24 months 12 or 24 months 12 or 24 months 12 or 24 months

*NIBE heat pumps are guaranteed for 24 months for parts and labour from the date of installation or 33 months from the date of manufacture (whichever is shorter). This is based on the unit being installed and commissioned by a NIBE accredited installer, serviced every year and the Benchmark documents completed. Where this condition is not met, any chargeable spare parts or components issued within the applicable guarantee period still benefit from a 12 month warranty from the date of issue by the manufacturer.

NIBE F2040 Monobloc Air Source Heat Pump

The NIBE F2040 is an air-to-water heat pump which can provide heating, cooling and hot water from a single system for small to medium sized homes. The system is ideal for underfloor heating or radiators. The NIBE heat pump works in outdoor temperatures as low as –20°C and can generate hot water up to 58°C.

Both the outdoor and indoor units have been designed to be as compact as possible. The outdoor unit is pre-wired with a power cable and pre-charged with refrigerant for easy installation. The heat pump can either be mounted on a wall or floor standing and the outdoor unit can be installed up to 12m away from so you have plenty of flexibility.

NIBE F2300 Monobloc

The NIBE air-to-water air source heat pump has been designed for large homes with a high demand for energy and commercial properties. It is available in two outputs: 14 or 20 kW.


Get FREE Heat Pump Quotes

 

Get FREE Air Source Heat Pump quotes from trusted engineers in your area. Get quotes now

 


Why Choose a NIBE Air Source Heat Pump?

Easy to Install, Use & Maintain

There are 2 main elements to the NIBE heat pump, both of which have been designed to fit into your home as easily and discreetly as possible. The outdoor unit can be installed on almost any terrain, up to 12m from the indoor unit, is pre-wired and pre-charged with refrigerant. The indoor module fits into a 60 x 66 x 180 cm space with no flues or ventilation needed and can be wall mounted or floorstanding.

Very Quiet Operation

The NIBE heat pump is one of the quietest on the market with blades specially designed
to move as much air as possible with minimal noise.

Save Money on Energy Bills

A traditional oil or gas boiler will use 1kW of energy to produce less than 1kW of usable energy, whereas a NIBE air source heat pump will use 1kW to produce 3kW of energy. The compressor and energy saving motor ensure that only as much energy as is necessary is needed.

As a direct result of the heat pump’s efficiency, many homes will see a significant reduction in their energy bills. NIBE claim this could be as much as 65% for some homes.

Reduce Carbon Footprint

Installing an air source heat pump is a fantastic way to reduce your impact on our environment. Some studies show that this could cut a home’s carbon emissions by as much as 50% as there is no fossil fuel combustion involved and the energy is harvested from the natural air. In addition, the NIBE heat pump is charged with a refrigerant with a low environmental impact.

Easy to Maintain

The average life of a boiler is just 8-10 years but as long as your air source heat pump gets an annual service it should need very little maintenance and many can last for up to 25 years.

Heat Your Home All Year Round

Air source heat pumps by NIBE will work in the worst UK temperatures as they are designed to cope with temperatures as low as -20°C.

Get Paid to Generate Your Own Heat

An air-to-water heat pump could earn you money through the government’s Renewable Heat Incentive (RHI) payments. The RHI scheme pays owners of eligible renewable heating systems for each unit of energy generated for 7 years after it has been commissioned. NIBE estimate that a typical 3 bedroom house could earn as much as £820 per year through the scheme which is around £5,740 over the 7 years of the scheme**. Payments will vary depending on the current tariff, the technology installed and how much energy you generate.

The heat pump needs to be installed by an MCS accredited installer to ensure it’s eligible for the payments. Get free heat pump installation quotes from an MCS accredited installer near you.

**Actual figure £821.96 a year (£5,753.72 in total over the seven-year scheme). Based on a total annual energy demand of 15,000 kWh, system coefficient of performance (SCOP) of 3.7 and air source heat pump tariff payments of 7.51 p/kWh.

How Much Does a NIBE Air Source Heat Pump Cost?

On average, you’re looking at costs of between £6,000 – £12,000 to buy and install an air source heat pump. This is less than installing a ground source heat pump as this required drilling into the ground as part of the installation.

The upfront cost can be a daunting prospect for some, but it’s important to remember that once this is out of the way you’re looking years of energy savings and potential earnings through the Renewable Heat Incentive (RHI) scheme. The amount you could save in terms of energy bills will depend on how inefficient you previous heating system was by comparison and how well your home is insulated.

Take a look at our comparison of the Best Air Source Heat Pump Manufacturers to compare the key features and typical prices of the leading models.

Interested in a NIBE Air Source Heat Pump?

Whether it’s a NIBE heat pump you’re interested in or you’ve another manufacturer in mind, the best way to save money on the installation is to compare quotes.

You can complete our quick and simple enquiry form today and we’ll find you free quotes from up to 3 qualified and reputable installers in your area.


Get FREE Heat Pump Quotes

 

Get FREE Air Source Heat Pump quotes from trusted engineers in your area. Get quotes now