Announcement

Collapse
No announcement yet.

Biasi m96

Collapse
  • If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Biasi m96

    Hi' I have a biasi M96.24SM/B combi boiler there seems to be no signal to the diverter valve actuator for the hot water so we have to have the heating on to get hot water, if I remove the actuator motor and push the pin in the diverter manually the hot water side will work without the heating on if someone could point me in the right direction I would be much obliged thanks Ed. ps I have changed the d.m.w heat exchanger and the diaphram in the diverter valve.

  • #2
    if you remove the head.turn on the hot water and then heating to see if it moves.if not either the head needs replacing or the pcb..

    Comment

    Working...
    X